top of page

AUTO WIDE BELT PLANER SANDER
Model:
-
ATSC-600H & ATSP-600H & ATSCP-600H
-
ATSC-900H & ATSP-900H & ATSCP-900H
-
ATSC-1100H & ATSP-1100H & ATSCP-1100H
-
ATSC-1300H & ATSP-1300H & ATSCP-1300H
OVERVIEW:
AUTO WIDE BELT PLANER SANDER
-
PRECISE
-
STURDY
-
RELIABLE
-
ECONOMIC
Description
-
The machine frame is manufactured of heavy duty steel plate to minimize vibration and deflection.
-
All parts of the machine can be easily obtained for maintenance and service.
-
Under the sanding aggregate and the pressurerollers, it’s the stable feed table.
-
Around the table, it runs an endless anti-slip conveyor belt.
-
The drive is powered by a strong feed motor and a variable speed control from 4 to 16 meters per minute.
-
The conveyor belt is adjustable with an auto tracking unit.
-
The sanding belt runs around the contact drum and the tension (or idle) roller.
-
The tracking of the sanding belt is achieved by an electric-eye.
-
MICRO-COMPUTER THICKNESS SETTING
This machine employs a micro-computer for high accuracy and fast setting of thickness.
-
ANTI-KICKBACK FINGERS
The anti-kickback fingers are provided in front of spiral cutter head for eliminating the danger of panel kickback.
-
AUTOMATIC TRACKING CONTROL OF CONVEYOR BELT
Employs pneumatic system for automatic control of conveyor belt running track, that ensuring normal track at all times.
-
AUTOMATIC BRAKE
Employs a disc type braking system. In case of insufficient air or power failure, the machine brakes instantly for safety.
-
COMPREHENSIVE SAFETY GUARDS
-
Emergency stop switch.
-
Body activated emergency stop bar.
-
Sanding belt tracking limit control.
-
Automatic machine stop in event of power falilure.
-
Contact drum does not run in case of loose tensionof sanding blet.
-
SPIRAL CUTTERHEAD
-
The precision machined spiral cutter head is mounted in front of sander head.
-
It gives heavy duty planing capacity, low noise urnning and extremely fine sutface of cut.
-
The spiral cutterhead is fitted with tungstein carbide knife inserts, permitting for use on four edgs. Frequent knife sharpening is elimited.
-
FEATURES
Suitable for heavy process on laminaing board and solid wood.

SANDING BELT CAN BE QUICKLY STOPPED BY DISC BRAKE DEVICE.

AUTOMATIC CONVEYOR BELT TRACKING CONTROL.

SPIRAL CUTTERHEAD
-
The precision machined sprial cutter head is mounted in front of sander head.
-
It gives heavy duty planing capacity, low noise running and extremely fine surface of cut.
-
The spiral cutter head is fitted with tungstein carbide knife inserts, permitting for use on four edgs. Frequent knife sharpening is elimited.

TWO HEADS
-
Can be operated in 3 modes (optional):
-
Drum only.
-
Platen only.
-
Drum and platen is standem.
-
Two-head sander can produce fine finishing result in one single pass.

SPECIFICATION

-
Specifications and design chrcteristics aresujectto change without prior notice.
FULPOW INDUSTRIAL CORP.,
Address:
7F-2, NO. 400, Sec. 1,Chang Ping Road,
Taichung 40652,Taiwan
TEL : +886 4 22439235
FAX : +886 4 22443829
E-Mail:fulpow@ms7.hinet.net
bottom of page