top of page

SPINDLE SHAPER SERIES

SPINDLE SHAPER SERIES

Model:

  • SP-735M

  • SP-735MS

  • SP-735T

  • SP-735TS

OVERVIEW:

SPINDLE SHAPER SERIES - 735 SERIES

Description

 

A dependable source for all your needs in high quality spindle shapers.

TILTING SPINDLE

 

  • The tilting spindle provides angle cutting form -5°~90°~+45°. Spindle tilting handwheel is located at front within easy reach. A tilt scale is attached for accurated angle setting.

SLIDING TABLE ( MODELS SP-525MS, SP-525TS, SP-625MS AND SP-625TS ONLY )

 

  • Sliding table model is an integrated system providing maximum accuracy and effortless cutting effects. Sliding table is integrated with (6) nsk#6004 accentric roller bearings with accuracy to 0.002”. Tenoning attcachment is included as standard feature.

QUICK CHANGE SPINDLE SPEEDS

 

  • V-belt is quickly released for speed change by simply loosening one lock lever, and shifting the belt to required position.

FENCE

 

  • Cast aluminum alloy fence halves are precision machined. The fence assembly is attached with a 5” diameter outlet dust hood.

  • The fence halves can be precision adjusted by micrometric adjustment knob with 0.008” graduation.

INTERCHANGEABLE SPINDLES:

 

  • Choice of 4 spindle diameters- 1¨, 1-1/4¨, 1-3/8¨, 1-1/2¨or choice of metric sizes- 25mm, 30mm, 35mm, 40mm. spindle has mk5 taper to ensure precision fitting and allow quick changeover of another spindle.

 

QUICK CHANG SPINDLE SPEEDS:

 

  • The spindle is driven by a four-speed pulley for spindle speeds of 3000, 4500, 7500 and 10000 r.p.m. change of speed is quick and easily accomplished by simply loosening a lock lever, and shifting the complete assembly.

 

FOOT SPINDLE LOCK:

 

  • The spindle is foot treadle locked for convenient cutter and spindle change.

 

FOOT SPINDLE BRAKE:

 

  • Tradle plate provides instant stop of the running spindle after power has been turned off.

REVERSIBLE SPINDLE ROTATION:

 

  • The spindle is reversible to ensure safe rotation in clockwise or counter-clockwise direction.

ROUTING OPERTION:

 

  • Optional collets can be supplied to enable the shaper do a routing application. provides excellent flexibility all in one shaping system.

TILTING SPINDLE:

 

  • The tilting spindle provides angle cutting from –5°~90°~+45°. spindle tilting handwheel is located at front within easy reach. a tilt scale is attached for accurate angle setting. a locking handle anchors spindle into fixed angled position.

SPINDLE RAISING:

 

  • The spindle is raised or lowered by graduated handwheel, providing 0.04¨elevation per full revolution of the handwheel. Quick clamp lever positively holds spindle at a required setting.

TABLE INSERTS:

 

  • The spindle is fitted with 2 insert rings (6-3/8” & 8-5/8”) permitting for use of a wide variety of shaper cutters and spindle speeds.

FENCE:

 

  • Precision machined fence provides the accuracy demanded in complex shaping applications. The fences are supported by a massive cast iron body and integrated with a 5¨cast iron dust shroud.

SPECIFICATION

  • Specifications and design characteristics are subject to cahange without prior notice.

STANDARD EQUIPMENT

 

  • Magnetic switch with overload protection

  • Choice of one spindle size: specify spindle diameter when ordering. (optional spindles available)

  • Spring hold downs: vertical set of two pieces. horizontal set of two pieces.

  • 5 table inserts

  • Precision fence with 5¨cast iron dust outlet

  • Reversing switch

  • Service tool kit

  • All electrical components are ul／csa approved for u.s. market

  • Parts & operations books

FULPOW INDUSTRIAL CORP.,

Address：

7F-2, NO. 400, Sec. 1,Chang Ping Road,

Taichung 40652,Taiwan
TEL : +886 4 22439235

FAX : +886 4 22443829

E-Mail：fulpow@ms7.hinet.net

bottom of page