AUTO WIDE BELT PLANER SANDER
Model:
-
FTC-600J
-
FTP-600J
-
FTCP-600J
-
FTC-900J
-
FTP-900J
-
FTCP-900J
OVERVIEW:
AUTOMATIC WIDE BELT SANDER J SERIES
(ECONOMIC MODELS: SINGLE HEAD / DOUBLE HEAD SANDER)
DESCRIPTION
CONSTRUCTION
-
The machine frame is manufactured of heavy duty steel plate to minimize vibration and deflection.
-
All parts of the machine can be easily obtained for maintenance and service.
TABLE AND CONVEYOR BELT
-
Under the sanding aggregate and the pressurerolling, it’s the stable feed table.
-
Around the table, it runs an endless anti-silpconveyor belt.
-
The drive is poweredby a strong feed motor and a variable speed control from 4 to 16 meters per minute.
-
The conveyor belt is adjustable with an auto tracking unit.
SANDING BELT
-
The sanding belt runs around the contact drum and the tension (or idle) rolling.
-
The tracking of the sanding belt is achieved by an eletriceye.
-
Changing the sading belt is very simple & quick.
CONTACT DRUM
-
A perfect contack drum is essential for sanding without leaving cross marks.
-
The contack drum consists of a steed rolling covered with heavy-duty rubber.
-
Besides the standard 75 (or 60) shore hardness, there are rollers also available of hardness varying from 50 to 90 shore.
PRESSURE ROLLER
-
The spring loaded hold-down rollers are mounted at the infeed and outfeed the machine to ensure positive feedings.
AUTOMATIC BRAKING
-
The air disc brakes will stop machine if emergent stop or limit switch is tripped.
-
The machine will automatically stop its power off.
SIMPLE CONTROLS
-
The operation controls are centralized on a simple control panel large, clearly-identified and color coded push buttons can simplify set-up and start-up as well.
QUICK READING OPENING SCALE
-
Simple read-scale to indicate the accurate feed bed opening when set-up is made.
SAFETY FEATURES
All machines are provided with security protection deivces:
-
Emergency stop button
-
Belt tracking limit switch
-
Safety bar
-
Automatical stop if power off
-
Sanding belt protection device
The drum will keep stationary if sanding belt is not tensioned before operation.
STANDARD ACCESSORIES
-
Sanding belt
-
Motors
-
Servicing tools & tool box:
-
Dial gauge
-
Instruction manual
OPTIONAL ACCESSORIES
-
Dust brush for cleaning work-pieces.
-
Extension table for infeed or outfeed.
-
Digital readout for thickness
-
Digital read
SANDING BELT CAN BE QUICKLY STOPPED BY DISC BRAKE DEVICE.
AUTOMATIC CONVEYOR BELT TRACKING CONTROL.
TWO HEADS
-
Can be operated in 3 modes (optional):
-
Drum only.
-
Platen only.
-
Drum and platen is standem.
-
Two-head sander can produce fine finishing result in one single pass.
F: “fullpower” (brand)
T: top sander
C: contact drum head
P: combination head of drum and platen
Be: sanding belt length 75”
S: sealer sander (ftc-600s, ftc-900s, ftc-1100s, ftc-1300s)
H: heavy duty
J: economic model
E: standard model
(verious optional accessories available upon customer’s request, please refer to technical date sheet.)
SPECIFICATION
