FULPOW

WIDE BELT SANDER

AUTO WIDE BELT PLANER SANDER

AUTO WIDE BELT PLANER SANDER

Model:

  • FTC-600S

  • FTC-900S

  • FTC-1100S

  • FTC-1300S

OVERVIEW:

AUTOMATIC WIDE BELT SANDER
S SERIES
(SEALER SANDER)

DESCRIPTION

CONSTRUCTION

  • The machine frame is manufactured of heavy duty steel plate to minimize vibration and deflection.

  • All parts of the machine can be easily obtained for maintenance and service.

 

TABLE AND CONVEYOR BELT

  • Under the sanding aggregate and the pressurerolling, it’s the stable feed table. 

  • Around the table, it runs an endless anti-silpconveyor belt. 

  • The drive is poweredby a strong feed motor and a variable speed control from 4 to 16 meters per minute. 

  • The conveyor belt is adjustable with an auto tracking unit.

 

SANDING BELT

  • The sanding belt runs around the contact drum and the tension (or idle) rolling. 

  • The tracking of the sanding belt is achieved by an eletriceye. 

  • Changing the sading belt is very simple & quick.
     

CONTACT DRUM

  • A perfect contack drum is essential for sanding without leaving cross marks. 

  • The contack drum consists of a steed rolling covered with heavy-duty rubber. 

  • Besides the standard 75 (or 60) shore hardness, there are rollers also available of hardness varying from 50 to 90 shore.
     

PRESSURE ROLLER

  • The spring loaded hold-down rollers are mounted at the infeed and outfeed the machine to ensure positive feedings.

 

AUTOMATIC BRAKING

  • The air disc brakes will stop machine if emergent stop or limit switch is tripped. 

  • The machine will automatically stop its power off.

 

SIMPLE CONTROLS

  • The operation controls are centralized on a simple control panel large, clearly-identified and color coded push buttons can simplify set-up and start-up as well.

 

QUICK READING OPENING SCALE

  • Simple read-scale to indicate the accurate feed bed opening when set-up is made.

 

SAFETY FEATURES

All machines are provided with security protection deivces:

  • Emergency stop button

  • Belt tracking limit switch

  • Safety bar

  • Automatical stop if power off

  • Sanding belt protection device

The drum will keep stationary if sanding belt is not tensioned before operation.

SANDING BELT CAN BE QUICKLY STOPPED BY DISC BRAKE DEVICE.

AUTOMATIC CONVEYOR BELT TRACKING CONTROL.

TWO HEADS

 

  • Can be operated in 3 modes (optional):

  1. Drum only.

  2. Platen only.

  3. Drum and platen is standem.

  4. Two-head sander can produce fine finishing result in one single pass.

F: “fullpower” (brand)
T: top sander
C: contact drum head
P: combination head of drum and platen
Be: sanding belt length 75”
S: sealer sander (ftc-600s, ftc-900s, ftc-1100s, ftc-1300s)
H: heavy duty
J: economic model
E: standard model
(verious optional accessories available upon customer’s request, please refer to technical date sheet.)

SPECIFICATION

FULPOW INDUSTRIAL CORP.,

Address:

7F-2, NO. 400, Sec. 1,Chang Ping Road,

Taichung 40652,Taiwan
TEL : +886 4 22439235

FAX : +886 4 22443829

E-Mail:fulpow@ms7.hinet.net